A pager solution linked to an epilepsy alarm or a monitoring alarm can make a big difference to a family member or a carer.
The solution enables a rapid response in the event of a seizure or other emergency situations, even when you are not in the immediate vicinity. This provides greater peace of mind at home or in a care setting.
The result is a safer everyday life for the individual and a reduction in the burden on both relatives and staff.
Receiver P202
A relative or carer carries the Receiver P202, which receives signals from one or more alarms. Both epilepsy alarms and supervision alarms can be connected to the receiver.
The receiver and transmitter communicate via the Alert-iT Safelink™ radio protocol. This means that an alarm is triggered if the receiver moves out of range.
Alarms are signalled by an audible tone or vibration. Information about the alarm is shown on a backlit display. The receiver can be worn on a strap around the neck or secured with a clip in a trouser pocket.
The P202 receiver has a rechargeable battery with a standby time of up to 40 hours, depending on usage.
P212 Transmitter
The P212 transmitter is connected to the alarm’s control unit and relays the alarm signal to the P202 receiver. The P212 transmitter is battery-powered.
Accessory: Range Extender P164
The Range Extender P164 can be used as required. The Range Extender P164 is plugged into a mains socket. In the event of a power cut, a backup battery takes over.
All alarm transmitters connected within the system benefit from an extended range.
The P202 receiver and P212 transmitter are included in the pager pack
Compatible with:
- Emfit Epilepsy Alarm
- NightWatch +
